Laddar
Laddar
Laddar

Standards for head protection

Standards for head protection, safety helmets, impact-resistant caps, and impact-resistant baseball caps.

EN397

EN 397:2012 Industrial helmets

EN 397 specifies both physical and functional requirements. Physical requirements include materials, construction, and size, while functional requirements include shock absorption capacity, lateral stiffness, and protection against penetration by sharp objects. The chin strap releases at 15-25 kg to prevent the helmet from causing strangulation or injury in case of a fall where it could get stuck. In most cases, EN397-compliant helmets are recommended for work at heights.

EN812

EN 812 Bump caps

EN 812 specifies the tests that a bump cap must undergo and pass. These are largely similar to the tests that a safety helmet undergoes. EN 397 specifies both physical and functional requirements. Physical requirements include materials, construction, and size, while functional requirements include shock absorption capacity, lateral stiffness, and protection against penetration by sharp objects.

50365

EN 50365 class 0

Electrically insulated helmets for use in low-voltage installations.

EN812

EN 12492:2012

The chin strap on helmets certified to EN12492 releases at a pressure of at least 50 kg. Therefore, the helmet remains in place in case of a fall and is suitable for environments such as rock climbing to protect against falling rocks.